1. Step #1: Pour a simple floating foundation.     Step #2: Bolt arches together on the ground. 2. Step #3: Raise the arches into place. In most cases no heavy     equipment is necessary when raising your arches. 3. Step #3 Continued: If heavy equipment is available it could be     helpful, but once again it is not necessary. 4. Step #4: All the arches are finally up. If you purchased     an open ended building, you are done. 5. Open Ended Building. 6. All arches completed. 7. Step #5 Option 1: Install the end walls. Our pre-cut,     pre-drilled end walls are easy to install with features like weather     strip inserts and heavy-duty trim kits that guarantee a lifetime     custom fit.     The last nine inches of each end panel is flat so the two panels fit     tight when bolted together making it easy to assemble. The bolts     sit on the flat surface, not a corrugated one giving a tight     seal with no leaks. 8. Step #5 Continued: Installing the end walls. 9. Step #6: Install the doors. 10. Building with end walls completed. 11. Step #5 Option 2: Building your own end wall is an easy      task for any do-it-yourselfer. Beautiful end walls      can be customized to your own specifications,      requirements and personal tastes. 12. Add your own end walls continued. 13. Customized end wall completed. 14. Customized end wall completed. Call for our monthly specials. Toll Free 1.888.848.2011 International 001.954.927.6566 Toll Free Fax 1.800.445.0421 International Fax 001.954.927.5670 Visite nuestra página en Español For information about our I-Beam Types steel buildings, please visit American Duro Beam.